To reduce noise in a classroom, identify the main noise sources and where sound lingers, install enough sound-absorbing treatment in suitable locations, and organise activities to reduce competing sound. Ceiling and wall panels can shorten echo and make instructions easier to hear. Furniture pads and thoughtful layouts help too, while noise travelling between rooms needs a different assessment.

Several groups are working at once. Chairs scrape as children move between tables. An educator repeats an instruction, a student asks what was said, and voices gradually rise to compete with everything else.

It is a familiar moment in classrooms, kindergartens and early learning centres. Conversation and movement belong in these spaces. But when the room keeps reflecting sound, ordinary activity can become difficult to listen through.

The practical starting point is to understand what the room contributes. SoundFix’s education projects show how assessment, suitable absorption and attention to room use can make a measurable difference.

1

Identify where noise builds up

Observe the room during the activities that cause difficulty, then record dimensions, finishes and occupancy for assessment.

2

Add enough absorption, in the right places

Ceiling panels, wall panels or both, with quantity and placement following the assessment rather than a panel count.

3

Match the solution to room use

A classroom, a kindergarten playroom and a multipurpose hall each need a plan based on how the space is actually used.

Why classrooms and kindergartens become noisy

There are two overlapping issues: sound being produced and sound remaining in the room.

Chairs, conversation, equipment and nearby activities generate sound. Hard ceilings, glazing, walls and floors reflect some of it back. New sounds then arrive while earlier sounds are still fading, making individual voices harder to distinguish.

People often call this “echo”. The more precise term is reverberation, meaning sound lingering through repeated reflections. Reverberation time, measured in seconds, describes how quickly it decays. RT60 refers to the time for sound to fall by 60 decibels after the source stops.

Reference: ASHA professional classroom acoustics guidance

1. Identify where the noise builds up

Before choosing classroom acoustic treatment, observe the room during the activities that cause difficulty. Is whole-class instruction unclear even when students are listening? Does the problem increase during group work? Is the loudest disturbance coming through a doorway or from equipment?

Walk through the room with the educator who uses it. Record its approximate length, width and ceiling height, existing finishes and typical occupancy. Note where instructions are delivered and where children struggle to hear them.

Practical action: keep a simple noise diary over several sessions. Record the activity, location, likely source and what was difficult to hear. Give this to the person assessing the room.

Professional assessment can then distinguish excessive sound decay from background noise or sound transmission. Ask for a documented baseline and a plan for checking the result after installation. Comparable room conditions and measurement positions matter; an informal impression alone cannot establish a numerical improvement.

At Newlands Primary School, SoundFix’s published second-stage project describes measurements before and after installing ceiling and wall panels. Reported reverberation time fell from 1.14 to 0.32 seconds, approximately 72%. The value of that example is the documented change in the treated space, rather than a prediction for every classroom.

2. Add enough absorption in the right places

Sound-absorbing panels reduce the sound energy reflected back into a room. Their effectiveness depends on the material, thickness, mounting arrangement, treated area and room itself. A few decorative panels may provide too little absorption for a large, hard-surfaced space.

Acoustic ceiling panels can use substantial overhead space without occupying teaching walls. Acoustic wall panels can address additional reflections where wall treatment is appropriate. Some rooms benefit from both. Product selection and placement should follow the assessment, with lighting, services and everyday use considered in the design.

Practical action: ask for a marked-up panel layout and the reason for the proposed quantity. A useful proposal explains how the treatment suits the room, rather than simply offering a panel count.

At Kingsville Primary School, SoundFix treated the gym with polyester wall panels and ceiling foam panels. The published average reverberation time changed from 2.43 to 1.06 seconds, a 56% reduction. This is a relevant example for reducing echo in school halls, where large reflective surfaces need consideration together.

An art room at East Doncaster Secondary College illustrates another practical constraint. Ceiling treatment preserved walls for artwork and equipment. The case study reports reverberation time falling from 0.89 to 0.48 seconds, approximately 46%. A treatment plan needs to fit the work happening below it.

Unsure whether your room needs ceiling panels, wall panels or both? Share the room type, location, approximate dimensions and photographs so the team can discuss an appropriate assessment and treatment scope.

Request advice from SoundFix

3. Match the solution to how the space is used

A classroom needs to support instructions and small-group discussion. A kindergarten accommodates play, singing and quieter activities. A multipurpose hall may alternate between sport, assemblies and performances. Each needs a plan based on its actual use.

At Gowrie Carlton Early Learning Centre, different areas received different treatments: ceiling panels and acoustic circles in the corridor, and circles with wall panels in two areas labelled “Outdoor Areas” in the case study. The corridor’s reported reverberation time fell from 1.04 to 0.45 seconds, approximately 57%.

At Panorama Heights Preschool, ceiling treatment addressed sound lingering in the main activity room. Published mid-frequency measurements changed from 1.40 to 0.36 seconds, a 74% reduction in reverberation time. These are room-acoustic results, not measured improvements in children’s behaviour or learning.

Practical action: sketch the room’s busiest and quietest activities. Trial moving story time away from noisy play and circulation routes, and pause competing activities for important instructions. These are practical suggestions to test locally, not changes documented in those projects.

Treatment and routines work together. Chair-leg pads can address scraping, and suitable soft finishes can help in selected areas. Neither should be assumed to provide enough absorption for a whole hall. Equally, a well-treated classroom still benefits from sensible activity planning.

For halls, explain every use to the assessor, including microphones, music, sport and community bookings. Agree on the listening priorities before selecting the treatment.

What helps, and when?

Comparison of classroom and kindergarten noise reduction approaches.
Approach Problem addressed Practical benefit Limitations Best-fit space
Chair-leg pads and quieter furniture movement Scraping and impact at the floor Reduces avoidable noise at its source Does not treat whole-room echo; pads need checking Classrooms and activity rooms
Soft furnishings and suitable floor finishes Some reflections and movement noise Adds absorption where practical Performance varies; cleaning and room use constrain choices Reading corners and quieter learning areas
Activity zoning and room layout Competing conversations and activities Separates noisy tasks from listening areas Does not isolate open zones or remove reverberation Group classrooms and kindergarten playrooms
Acoustic ceiling panels Reflections from overhead surfaces Adds absorption while retaining wall space Coverage, mounting and services need planning Classrooms, early learning centres and halls
Acoustic wall panels Reflections from hard wall surfaces Complements ceiling treatment where needed Needs available wall area and suitable positioning Classrooms, halls and multipurpose rooms
Sound isolation measures Noise passing between rooms Addresses transmission through building elements and gaps Requires diagnosis of sound paths; ordinary absorptive panels are insufficient Adjoining rooms with intrusive sound
Reflections absorbed inside the room

Acoustic treatment

Absorbs reflections inside a room so speech is clearer and sound stops lingering. This is what the projects on this page address.

Sound passing between rooms

Sound isolation

Blocking noise travelling through walls, doors, ceilings and gaps. Ordinary absorptive panels are not a barrier and need a separate assessment.

SoundFix’s focus here is reducing echo and sound build-up within commercial rooms. Ordinary acoustic panels should not be presented as a barrier that blocks noise between classrooms. Read more in the SoundFix guide to absorption and soundproofing.

Real SoundFix project results

Measured reverberation time, before and after treatment

Published values from six SoundFix education case studies. Lower is better. Bars are to scale.

Before treatment After treatment

Panorama Heights Preschool, main activity room74% shorter

1.40 s
0.36 s

Newlands Primary School, second-stage learning space72% shorter

1.14 s
0.32 s

Gowrie Carlton Early Learning Centre, corridor57% shorter

1.04 s
0.45 s

Kingsville Primary School, gym56% shorter

2.43 s
1.06 s

Leongatha Secondary College, classroom50% shorter

1.83 s
0.92 s

East Doncaster Secondary College, art room46% shorter

0.89 s
0.48 s

RT means reverberation time. A 50% reduction in RT does not mean 50% less loudness or a 50% reduction in decibels. These projects involve different rooms and reporting bases, so the percentages are not a performance ranking or a guarantee for another site.

These figures have been checked against SoundFix’s published case studies. Percentages are calculated as (before minus after) divided by before, multiplied by 100 and rounded to the nearest whole number.

Verified published results from SoundFix education projects.
Facility Space Original issue Treatment Verified published result Case study
Kingsville Primary School Gym Prolonged sound decay Polyester wall and ceiling foam panels 2.43 to 1.06 s; 56% shorter RT Project
Panorama Heights Preschool Main activity room Lingering sound in a hard-surfaced room Ceiling panels 1.40 to 0.36 s; 74% shorter mid-frequency RT Project
Newlands Primary School Second-stage treated learning space Excessive reflections Ceiling and wall panels 1.14 to 0.32 s; 72% shorter RT Project
Leongatha Secondary College Classroom Excessive echo Ceiling panels 1.83 to 0.92 s; 50% shorter RT Project
Gowrie Carlton ELC Corridor Reverberation Ceiling panels and acoustic circles 1.04 to 0.45 s; 57% shorter RT Project
East Doncaster Secondary College Art room Reflections interfering with communication Ceiling panels 0.89 to 0.48 s; 46% shorter RT Project

Leongatha provides a regional Victorian classroom example alongside the Melbourne projects. Its result demonstrates improvement, without implying that a particular acoustic standard was met.

Let us read the room

Tell us the room type, location, approximate dimensions and when noise causes the most difficulty.

Request advice or a quote

What can staff notice straight away?

Changes in sound can be apparent as soon as a treated room is used. At St Bernard’s Primary School, Principal Emilio Scalzo described the hall after treatment: “I don’t need to raise my voice anymore.” That is a named customer observation about communication.

SoundFix’s published testimonial from Caren Aspinall, Coburg Learning Centre, describes the improvement as “instant”. This is feedback from Coburg, not from the other projects featured here.

Staff feedback and measurements answer different questions. Repeat acoustic testing establishes how the room changed. Educator observations describe everyday use. Claims about lasting changes in behaviour, learning or health need separate evidence.

Five signs your room needs professional assessment

  1. Instructions regularly need repeating even when children are ready to listen.
  2. Speech or everyday sounds audibly linger after they stop.
  3. Group work becomes difficult to follow as several voices overlap.
  4. Hard finishes dominate, or the room became noisier after a refurbishment.
  5. Furniture pads, layout changes and routines have not resolved the problem, or noise seems to enter from elsewhere.

These are prompts for investigation, not a diagnostic score. Take your observations to the assessment.

Frequently asked questions

How can we reduce classroom noise without a major renovation?

Start with avoidable sources, such as scraping chairs and unused noisy equipment. Review activity layout. If echo remains, assessed ceiling or wall treatment may be suitable for the existing room.

Are ceiling panels or wall panels better for schools?

It depends on room size, finishes, available surfaces and required absorption. Ceiling treatment preserves wall space; walls may need treatment too. Request a room-specific layout.

Can kindergarten noise reduction still allow active play?

Yes. The aim is to reduce unnecessary sound build-up while retaining conversation and play. Plan treatment around the mix of activities, with quieter listening areas where practical.

Will acoustic panels stop noise from the classroom next door?

Ordinary absorptive panels are designed primarily to control reflections inside a room. Noise travelling through walls, doors, ceilings or other paths needs a sound-isolation assessment.

How long does school acoustic panel installation take?

Timing depends on room size, access, treatment and scheduling. Published projects include single-day installations and the two-day hall installation at Watsonia Primary School. Confirm the programme for your site before making arrangements.

Make your learning space easier to hear in

If your classroom, kindergarten or hall sounds familiar, start with one room and a clear description of the problem.

For school acoustic panel installation in Victoria, including Melbourne and regional locations, SoundFix can discuss assessment, panel supply and installation suited to your space. Explore education acoustic solutions.

Request advice or a quote from SoundFix Acoustics

Include your room type, location, approximate length, width and ceiling height, and photographs showing the ceiling and walls. Tell us when noise causes the most difficulty and any preferred installation window.

Start your enquiry